£ 63.36–£ 104.30Price range: £ 63.36 through £ 104.30
CE-Marked Fire Damper
This CE-marked fire damper features a folding curtain-type blade design. Standard construction uses galvanized steel, with the option for grade 430 stainless steel. It supports 120-minute ‘E’ rated installations for masonry walls, drywall partitions, and concrete floors.
Normal Operation
Under normal conditions, the blade pack is recessed in the damper header and held by a fusible link, allowing unrestricted airflow through the duct.
Fire Response
When temperatures exceed 72°C, the fusible link melts, releasing the blade pack. Springs then fully extend the blades to close the duct
Application
Series 100 fire dampers are integral to building compartmentalization, a strategy to contain fires within specific zones, thereby saving lives, limiting building damage, and aiding firefighting efforts. Similar to fire doors, these dampers ensure normal airflow but close off ducts to prevent fire spread when necessary.
Optional: Grade 430 stainless steel for blades and/or case
Sizes
Minimum: 100mm x 100mm / 100mm diameter nominal
Maximum:
– In HEVAC frame: 1250mm x 1000mm / 1000mm diameter nominal
– In plate frame: 1000mm x 1000mm / 1000mm diameter nominal
– Larger units can be manufactured in multiple sections. Please contact us for details.
Finish
Bare metal
Mass per m² Face Area
20kg: S100BGH – 1000mm x 1000mm nominal size
25kg: S100CGH – 1000mm diameter nominal size
– Smaller units will be proportionally heavier relative to their size.
